Raised Ink Printing of Business Cards Has New 4 Color Option
July 2, 2008
The use of raised ink printing to make business cards has been a well-known normal procedure of printing for a long time. This kind of printing, additionally named raised thermographic printing, allows the ink on the paper to dry with an extended feel above the paper surface This raised ink impression is felt to offer a more memorable higher quality impression than a flat printed card.
To create the raised ink a powdered polymer is applied to the printed ink prior to drying the ink. Then when the ink is dried the ink that the powder stuck to dries with a raised feeling of thickness above the flat surface of the paper. Sometimes, it is desired to have only part of the ink raised so some of the ink is dried before the powder is applied. This portion of the ink will stay flat. It is only the portion of the ink that is wet when the powder is applied that will end up having the raised feel.
Many times, raised ink printing is kept limited to only one color. Additional colors adds to the complexity of the printing process. If two or more colors in a design must be printed very close to one another, then there is usually an additional handling charge for the printing due to the tighter registration required in handling. Printing designs with 3 or more colors has been rare because the increased complexity causes the printing to be quite expensive.
One choice to analysis additionally to a hunger as further color is the reason of a colored wallpaper take. This must be reviewed methodically because ink colors will illustrate a change on assorted colored backgrounds. Choices on colors, thickness, and texture of paper media provide an extremely large sum of choices for designing one’s card.
One more choice which could contribute difficulty and also to the price of the raised ink printing procedure is whether it is required for the ink to be printed to the card edge. If the design involves the ink to be printed to the end of the card it is designated as a full bleed to that card end. A full bleed requirement causes extra handling complication inside the procedure which is frequently addressed by optional charges for each card edge the printing ink must advance to.
Recently there has been a new improved full color process developed for raised ink. Business cards can be printed on the front side through a photo like color process, plus have all the edges printed to full bleed, and have all printing raised. As an instance, you can print the front of the card full bleed as color picture and have it all raised. At this instance this is only printed on glossy bright white paper. This new process extends the choices for thermographic raised ink ideas.
This should provide you a brief study of the raised ink printing procedure. So with this information you should be ready to proceed to use your creativity and make raised ink business cards that brand your business image for success.
Comments
